Introduce You To The Knowledge Of Square Ceiling Lamps

Introduce You To The Knowledge Of Square Ceiling Lamps

Square ceiling lamps are a more creative decorative lights, in many families will choose to buy the best decorative lights. Ceiling lamps are a kind of decorative lights, while square ceiling lamps are one of the ceiling lamps. In addition to the square ceiling lamp, there are round ball ceiling lamp, sharp flat round ceiling lamp, semi-circular ball ceiling lamp and so on.
The light source of the ceiling lamp is ordinary white bulb, fluorescent lamp, high – strength gas discharge lamp.

 Introduce You To The Knowledge Of Square Ceiling Lamps


I. How to remove the square ceiling lamp

1, adsorption square ceiling lamp removal Adsorption square ceiling lamp looks more beautiful, installation method is also more convenient, so many families will choose to install adsorption square ceiling lamp. The removal of the adsorption square ceiling lamp is also relatively simple, just need to find the screw of the lamp cover, and then it gets stuck, using a screwdriver to lower it.

Finally, the bulb, ceiling lamp base can be removed.

2, aluminum buckle plate square ceiling lamp removal

Aluminum buckle plate square ceiling lamp most lying in the kitchen, bathroom and other areas to use, in the removal only need to use a small sheet of knives, from the aluminum buckle plate square ceiling up or side seam hands, and then you can remove the ceiling lamp lamp cover, and then the light bulb, ceiling lamp base can be removed.

3, embedded square ceiling lamp removal

The embedded square ceiling lamp is usually nailed to the ceiling, so when removing from four corners, use a screwdriver to slowly remove, and then remove the lamp cover, and finally the light bulb, ceiling lamp base can be removed.
Small reminder: in the removal of square ceiling lamp, the first step is to be the power supply of the total valve closed, if removed and not immediately installed, the need to use insulation tape to wrap the wire, each wire has a separate placement.

 Introduce You To The Knowledge Of Square Ceiling Lamps


II How to change the light bulb of the square ceiling lamp

1, first disconnect the power supply valve, and then use the test pen to test whether the power supply is completely disconnected, to ensure the safety of the later operation;

2, the next is to remove the square ceiling lamp lamp, different types of square ceiling lamp removal method is not the same, different types of square ceiling lamp removal method such as above;

3, square ceiling lamp lamp after removal, and then the square ceiling lamp in the original light bulb removed, placed well, and then install the new light bulb can be;

4, before the installation of a new light bulb, you can light seat dust simple cleaning, pay attention not to make dust on the lamp interface;

5, after the lamp cover cleaned up, the lamp cover in accordance with the removal method of installation can be;

6, finally open the power supply valve, test whether the bulb can be used normally, can be tested several times, to ensure its stability.
Small reminder: When removing dusty lampshades, you need to wear eyes and masks to prevent dust from falling into your eyes or affecting breathing.


III. How to change the led light of the square ceiling lamp

1, in the operation of the lights installation, before replacing the led lamp, should be the home power supply valve off, in order to disconnect the power supply, to ensure the safety of follow-up operations;

2, the second is to remove the square ceiling lamp cover, and the lamp cover clean;

3, observe the original led lamp which point problem, whether to replace the led bulb again;

4, if the original led lamp has blackened one end, indicating that the lamp is damaged, need to replace the light bulb;

5, in accordance with the original led lamp specifications model to buy the same led lamp for replacement;

6, after observing the internal structure of the lamp, and then fixed the lamp’s reed open, you can take out the original led lamp tube;

7, after the newly bought led lamp pipe in accordance with the method of removal to reinstall, and then the reed lamp fixed, the other end into the power supply;

8, finally install the lamp cover, and then open the power supply valve, test whether the led lamp can be used normally.

The above is to introduce to you square ceiling this kind of creative decorative lights should be how to install and other relevant knowledge, hoping to help you.

For more decorative lights, please click here. www.furniturewholesaleltd.com

Leave a Reply

Your email address will not be published. Required fields are marked *